Basic Info.
Transmission Distance
>100m
Specification
L203.25 x W134 x H50 mm
Product Description
I. Summarization
High-voltage DMX controller with LCD display is a kind of controller with LCD digital display interface, used for control the
RGB color change of 4 line 3 channels(common anode) LED lamps, up to 34kinds of change programs to choose, at the same
time can accept DMX-512 international standard digital control. Controller can be stand-alone operation, automatically online,
accept standard DMX512 console control signal etc. method to work. According to the customer's actual demand, can
achieve jumpy changing, gradual changing, stroboscopic such change effect.
II. Technical Parameters
Working temperature: -20-60ºC
Power supply voltage: AC 100~240V 50/60HZ
Output voltage: DC 100~240V
Output connect way: common anode 4 line 3 channels
External dimension: L203ΧW134ΧH50 mm
Packing size: L310ΧW170ΧH60 mm
Net weight: 0.77kg
Gross weight: 1.22kg
Static power consumption: <3.96W
Maximum output current: 3*2A
Dimming frequence: 800Hz
Maximum output power: 660W(input voltage 110V), 1320W(input voltage 220V)
IV. Interface instruction:
power supply interface: input AC100~240V
Insurance block: when short circuit, can protect the whole circuit
Switch: control whole controller power on/off
,DMX512 signal input/output interface: interface sequence and detailed see below picture
Load output interface: load output, interface detail instruction see below picture.
+--Load common positive pole
R--Load red output pole
G--Load green output pole
B--Load blue output pole
V. Product packing schematic diagram
VI. Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit
can not occur between connecting wire before you turn on the power.
Controller have 4 function setting key: MODE, PARA, UP, DOWN.
2. MODE key choose in turn or press UP, DOWN key to choose:
No. | Display content | Instruction |
1 | BLACK | Static black |
2 | STATIC RED | Static red |
3 | STATIC GREEN | Static green |
4 | STATIC BLUE | Static blue |
5 | STATIC YELLOW | Static yellow |
6 | STATIC PURPLE | Static purple |
7 | STATIC CYAN | Static cyan |
8 | STATIC WHITE | Static white |
9 | COLOR CHANGE | Seven color jumpy changing |
10 | COLOR CHANGE2 | Jumpy changing (flicker) |
11 | 6 COLOR CHANGE | Six color jumpy changing |
12 | 6 COLOR CHANGE2 | Jumpy changing (flicker) |
13 | RGB CHANGE | Three color jumpy changing |
14 | RGB CHANGE2 | Jumpy changing (flicker) |
15 | RG CHANGE | RG jumpy changing |
16 | RB CHANGE | RB jumpy changing |
17 | GB CHANGE | GB jumpy changing |
18 | WHITE CHANGE | White stroboflash |
19 | 7 COLOR SMOOTH | Seven color gradual changing |
20 | 4 COLOR SMOOTH | Four color gradual changing |
21 | RG SMOOTH | RG gradual changing |
22 | RB SMOOTH | RB gradual changing |
23 | GB SMOOTH | GB gradual changing |
24 | COLOR GRADUAL | Seven color fade in and out |
25 | RGB GRADUAL | Three color fade in and out |
26 | WHITE GRADUAL | White fade in and out |
27 | RG GRADUAL | RG fade in and out |
28 | RB GRADUAL | RB fade in and out |
29 | GB GRADUAL | GB fade in and out |
30 | R GRADUAL | R fade in and out |
31 | G GRADUAL | G fade in and out |
32 | B GRADUAL | B fade in and out |
33 | ADJUST MODE | 0-255 level adjusted color |
34 | AUTO PROGRAM COLOR CHANGE2 | Auto operation selecting result of changing |
35 | DMX512 MODE | DMX512 control order |
36 | DMX512 DECODER | DMX512 decoder |
3. Press PARA to adjust in turn: (1-8 is static state, do not have adjust function)
No. | Parameters display | Instruction |
| | Maximum | Minimum |
1 | RUN SPEED | 100 | 0 |
2 | RUN TIMES | 100 | 0 |
3 | LOAD DEFAULT | Restore the factory parameter |
4. UP: increase parameter key/preset parameter.
5. DOWN: decrease parameter/preset parameter.
6. AUTO PROGRAM mode is repeatedly cycle running part or all of 7-32 patterns run,you can set whether participating in
repeated cycle of operation or not in RUN TIMES.
7. RUN TIMES: compiling the run times of the pattern under 34 AUTO PROGRAM, if the run times is 0, you can skip the
pattern,that means not running the pattern.
8. Preset parameter: each form has independent factory preset parameter, which is kept in controller separate. LOAD
DEFAULT can recover the factory parameter of the form. If under AUTO PROGRAM mode, using LOAD DEFAULT can
unified recover the parameter of all forms to factory parameter.
9. 32 ADJUST MODE is manual dimming, it can adjust the brightness of RGB 0-256 level respectively.
10. 34 DMX512 MODE is controlling all patterns (the first address) and speed(the second address).
11. 35 DMX512 DECODER is DMX decoder, completely accepting outside DMX512 signal to work. Taking 4 addresses,
R(the first address), G(the second address), B(the third address), reserved channel(the fourth channel), in need of setting
address(by pressing PARA).
VII.
Address:
Building E, Pingxi South Road No. 24, Pingdi Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Lights & Lighting
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Luxgreen LED Limited, the subsidiary of HK PRIOR LED TECHNOLOGY LIMITED. We are is a high-tech enterprise, combine the design, research&develop, manufacture, and export service of LED lighting products, Our factory is professional supplier of LED wall washer, LED downlight, LED floodlights, LED strips, LED spot lights, LED ceiling lights, LED track lights, LED underground lights, LED underwater lights, and varieties of DMX controlling system. They cover commercial lighting, office lighting, outdoor lighting, residential lighting, ect.
Our company was established in 2010, we hold the business tenet of "quality first, the supremacy of credibility"purposes, launched patent LED flexible RGBWA strip, LED RGBWA wall washer lights, and wireless DMX APP control system, which supplied for Shanghai EXPO 2010 Iceland museum lighting, our all products are praised by the customers.
We sell in Middle-East, Asia, Eastern Europe, North America, South America, Australia, Afica.
We own 2, 000-squaremeter produce area, high-speed chip mounter machine, integrating sphere, reflow soldering machine, glue machine, ect, 5 professional production lines, and one big showroom, Our company has obtained ISO9001 quality system certification as well as CE, RoHS, SGS, certitifications,
Trust us, we can be your reliable supplier, partner.